All the information you will ever need about the Bond Bugs history.   New to the world of Bond Bugs? Find all the points to watch for when buying a Bond Bug.   Information on available spares and replacement parts for the Bond Bug.   The Bond Bug Forum   The Bond Bug Picture Gallery   Past and Present Owners cars   Information on joining the Bug Club.   Bond Bug related links   Contact Information    
  Welcome to the webs biggest Bond Bug Web site. www.bondbug.com. To return to the Bond Bug home page please click here.  
       
   
  Bond Bug technical Data
Bond Bug Spares Bond Spares
Compatible Spares for the Bond Bug Compatible Spares
Bond Bug Service Data Service Data
Bond Bug Electrical Diagram Wiring Diagram
If you need to keep your bug on the road today below you will find the detailed technical specification and service data for the Bond Bug.

If anyone has the detailed spec for the 750 or the 850 engine please email it to me and I will update the site with the supplied information.
Need a printer friendly version?
Capacity 700 c.c.
Bore/Stroke 2.38 in. (60.45 mm) / 2.40 in. (60.96 mm)
Max BHP 29 at 5000 r.p.m. (700ES:31 at 5000 r.p.m.)
Max torque 34.5 lbs ft at 3000 r.p.m. (700ES: 38 lbs ft at 3000 r.p.m.)
Compression ratio 7.35:1 (700ES: 8.4:1)

Engine Lubrication
Submerged eccentric bi-rotor type oil pump - full flow filter

Cooling System
Pump assisted circulation and four-bladed fan driven by belt from engine pulley

Fuel System
Down draught carburetor, mechanical fuel pump, oil wetted air cleaner
Petrol tank capacity 5 Imp. gallons with no reserve. (23 litres)

Ignition
12 volt battery and coil - negative earth

Clutch
Borg & Beck dry single plate type 6.1/4" dia

Transmission
Four forward speeds and reverse - synchromesh on top, second and third
Gearbox ratios: Top 1.0:1
3rd 1.45:1
2nd 2.46:1
1st 4.27:1
Reverse 5.49:1
Final Drive 3.55:1

Tyres
Make - Goodyear
Type - Decathlon bias belted
Size - 155 - 10 in

Brakes
Hydraulically operated, internal expanding brakes to all wheels
Front 7"x1.1/2" (177.8 mmx38.1 mm)
Rear 7"x1.1/4" (177.8 mmx31.7 mm)

Steering
Burman Douglas worm and peg type

Suspension
Front: Leading arm suspension controlled by heavy duty coil spring and hydraulic suspension unit
Rear: Low roll-centre, 5-link rear suspension with wide base coil spring!damper units and stabiliser bar

Chassis
Box section, pressed steel with tubular braced cross members

Electrical Equipment
12 volt system, built-in rectangular headlamps with sealed beam units, foot controlled dipping switch. Combined stop/tail and rear flasher light units. Ignition key starting. Self-parking windscreen wiper

Bodywork
Coach built, all glass fibre two seater, embodying the latest unit construction technique for increased strength and rigidity. Completely corrosion-free and highly resistant to incidental damage.
Lift-up canopy with safety glass windscreen

General Dimensions
Wheelbase 77" (19558 mm)
Track 48.46" (1230.7 mm)
Overall length 110" (2794 mm)
Overall width 55" (1397 mm)
Overall height - (un laden, canopy closed) 50" (1270 mm)
Overall height - (canopy open) 83" (21082 mm)
Ground clearance - (laden) 5" (127 mm)
Kerb weight 7.75cwt (700cc)

Maintenance
Fuel Tank 5 Imp. gallons (23 litres)
Cooling System 5 pints (including heater)
Engine Sump 5.5 pints (2.5 litres) SAE 20W/50
Change Oil and filter every 3,000 miles.
Gearbox 1 pint SAE 80EP
Change Oil every 6,000 miles.
Final Drive 2.25 pints SAE 90/140
Change Oil every 15,000 miles.
Grease 5 points every 3,000 miles.
Tyre Pressure Front : 24 psi (normal driving) or 27 psi (fast driving)
Rear : 24 psi (normal driving) or 27 psi (fast driving)

Firing Order 1, 3, 4, 2
Spark Plug Type : Autolite AG 42
Gap : 0.025 (0.64mm)
Check every 5,000 miles.
Points Gap : 0:015 (0.38mm)
Adjust every 3,000 miles
Ignition Timing 10° BTDC
Tappet Clearance 0.006 (0.152mm)
Tappet adjustment No. 1 valve with No. 8 valve fully open.
No. 2 valve with No. 7 valve fully open.
No. 3 valve with No. 6 valve fully open.
No. 4 valve with No. 5 valve fully open.
No. 5 valve with No. 4 valve fully open.
No. 6 valve with No. 3 valve fully open.
No. 7 valve with No. 2 valve fully open.
No. 8 valve with No. 1 valve fully open.

Fan Belt Slack - 1/2 inch (13mm)

Can you help www.BondBug.com Do you have more information that could be added to this section?

If you have any information or pictures that you feel would help expand this section for future visitors please contact me by email.

New content is always welcome as are suggestions or corrections.
   
       
    web space provided by www.editing.co.uk | Copyright © 2001 - 2008 www.bondbug.com. | sponsored by www.onliner.co.uk